Condensation, rising damp or penetrating damp? How to tell

Most damp in UK homes falls into one of three types. They look similar but have different causes and fixes, so working out which one you've got saves money and arguments.

The short version

CondensationPenetrating dampRising damp
Where water comes fromMoisture in the air inside your home (cooking, showers, drying washing, breathing)Water getting in from outside: roof, gutters, cracked render, window seals, leaking pipesGround water moving up through the bottom of a wall
Typical placesWindows, cold outside walls, corners, behind furniture and in wardrobes against outside walls, bathroom ceilingsPatches at any height, often near a defect; can appear on ceilings below a roof or bathroomGround-floor walls only, from the skirting up, usually less than about a metre
TimingWorse in cold weather and in the morningWorse after heavy rainFairly constant, little change with the weather
SignsWater droplets, black spotty mould, musty smellA defined damp patch, sometimes with tide marks, that grows after rainA "tide line" with salts (white, fluffy deposits), peeling paint and crumbling plaster low on the wall

This table is a general guide, not a diagnosis. A home can have more than one type at once, and a leak can look like condensation.

Simple checks you can do

1. Look at where and when

Black mould on a cold corner of an upstairs bedroom, worse in winter, is very rarely rising damp. Rising damp can't climb to a first-floor ceiling. A patch that appears or spreads after rain points to water getting in from outside.

2. The foil test

Tape a square of kitchen foil, about 30cm across, tightly to the damp area and leave it for a day or two. If moisture forms on the room side of the foil, the water is coming from the air (condensation). If the wall side is wet, moisture is coming through the wall. It's a rough test, but it costs nothing.

3. Look outside

Check gutters, downpipes, roof edges, window sills and render on the outside of the wall behind the damp patch. Overflowing gutters and cracked render are common causes of penetrating damp.

4. Be careful with cheap damp meters

Pin-type damp meters are built to read moisture in timber. On plaster and masonry, salts and the wall material itself can give high readings even when the wall isn't wet. Use one to compare patches in the same wall, not as proof of rising damp.

Why condensation is so common

Warm air holds more moisture than cold air. When it touches a cold surface, such as single glazing, an uninsulated outside wall or a cold corner, the moisture turns back into water. Mould grows where surfaces stay damp. The Welsh Government's guidance for landlords links mould and dust mite problems to poor ventilation and humidity "especially beyond 70 per cent" (gov.wales) (last checked 18 Nov 2026).

Things that usually help with condensation:

If you rent, these things help, but they aren't a substitute for the landlord fixing causes such as broken fans, poor insulation or leaks. GOV.UK guidance tells landlords that advice to tenants "must never be a substitute for addressing the underlying causes of damp and mould" (GOV.UK) (last checked 18 Nov 2026). See renters' rights.

Penetrating and rising damp need a building fix

A dehumidifier won't fix water coming in from outside or up from the ground. These need repairs to the building, such as gutters, pointing, render, roof or drainage. Be wary of anyone who diagnoses rising damp and sells injection damp-proofing on the same visit. Get the outside of the building checked first, and if you can, get an independent surveyor who isn't selling the treatment.

Sources